QUICKLY ADJUST YOUR SNOWBOARD PROFILE
Within seconds, go from camber to rocker without tools and without unstrapping.
DOES THE SiQROCKER IMPACT THE FLEX OF MY SNOWBOARD?
During the design phase, we thought a lot about this. The end result is a spring built in to the center mechanism that underwent thorough analysis and testing. This spring helps to maintain the natural flex of your snowboard, allowing your board to feel and ride as you expect.
HOW IT WORKS
The SiQRocker is compatible with all boards that have a 4x4 or 2x4 binding bolt hole pattern. This version of the SiQRocker is not compatible with channel mounted binding systems, but we're working on that!
The SiQRocker works with camber snowboard profiles and several hybrid snowboard profiles. It converts camber into reverse camber but not the other way around. So as long as your snowboard has either a camber or flat profile between your bindings, you're good to go!
When the SiQRocker is in the relaxed position, you likely won't notice it is on your board. When it's in the full rocker position, the flexibility of your board will be maintained because we have designed the center mechanism with a spring for exactly this purpose. In order to increase the longevity of your board, we recommend that you do not store your board in the full rocker position.
Yes! There is no need to remove the SiQRocker between sessions. That being said, we recommend that you do not store your board in the full rocker position. If you are not riding, remove all pressure and store your board with the SiQRocker in the relaxed position. Simply put: No Ride = No Rocker.
Yes, but very little. There are spacers plates included with the SiQRocker that will increase the height of your bindings by a total of 6 mm. We worked hard on the design to keep your bindings as close to your board as possible.
The SiQRocker weighs in at 1.85 lbs.